Air Conditioning Technology - ACT2

Offered at the Following Campuses

  • Valdosta Campus
  • Coffee Campus

Program Overview

The Air Conditioning Technology Diploma program is a sequence of courses that prepares students for careers in the air conditioning industry. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of air conditioning theory and practical application necessary for successful employment. Program graduates receive an Air Conditioning Technology diploma and have the qualification of an air conditioning technician.

Entrance Requirements

*Submit a completed application and application fee;    
 
*Be at least 16 years of age;    
 
*Submit official high school transcript or GED transcript;   
  
*Submit official college transcripts, if applicable;     
 
*Present acceptable SAT or ACT scores taken within the last 60 months, or acceptable COMPASS or ASSET scores taken within the last 60 months. Documentation on a college transcript of successful completion of appropriate courses from a regionally accredited college or university may be accepted in lieu of test scores.

Course Overview

Credit Hours
General Education Core (8 hours)

Prereqs: Diploma Level Math Scores OR MATH 0090 w/ a "C" or better

Coreqs: None

Emphasizes the application of basic mathematical skills used in the solution of occupational and technical problems. Topics include fractions, decimals, percents, ratios and proportions, measurement and conversion, formula manipulation, technical applications, and basic statistics.

Prereqs: Diploma Level Reading and Writing Scores OR READ 0097 and/or ENGL 0097 w/ a "C" or better

Coreqs: None

Emphasizes the development and improvement of written and oral communication abilities. Topics include analysis of writing, applied grammar and writing skills, editing and proofreading skills, research skills, and oral communication skills.

Prereqs: Provisional Admission

Coreqs: None

Emphasizes human relations and professional development in today's rapidly changing world that prepares students for living and working in a complex society. Topics include human relations skills, job acquisition skills and communication, job retention skills, job advancement skills, and professional image skills.
Occupational Courses (44 - 49 hours)

Prereqs: Provisional Admission

Coreqs: None

Introduces the basic concepts, theories, and safety regulations and procedures of refrigeration. Topics include an introduction to OSHA, safety, first aid, laws of thermodynamics, pressure and temperature relationships, heat transfer, the refrigerant cycle, refrigerant identification, and types of AC systems.

Prereqs: None

Coreqs: AIRC 1005

This course introduces the student to basic refrigeration system principles and practices, and the major component parts of the refrigeration system. Topics include refrigeration tools, piping practices, service valves, leak testing, refrigerant recovery, recycling, and reclamation, evacuation, charging, and safety.

Prereqs: None

Coreqs: AIRC 1005

This course provides the student with the skills and knowledge and skills to install, test, and service major components of a refrigeration system. Topics include compressors, condensers, evaporators, metering devices, service procedures, refrigeration systems and safety.

Prereqs: Provisional Admission

Coreqs: None

This course provides an introduction to fundamental electrical concepts and theories as applied to the air conditioning industry. Topics include AC and DC theory, electric meters, electrical diagrams, distribution systems, electrical panels, voltage circuits, code requirements, and safety.

Prereqs: None

Coreqs: AIRC 1030 or IDFC 1011

This course provides the student with the skills and knowledge necessary for application and service of electric motors commonly used by the refrigeration and air conditioning industry. Topics include diagnostic techniques, capacitors, installation procedures, types of electric motors, electric motor service, and safety.

Prereqs: None

Coreqs: None

Provides instruction in identifying, installing, and testing commonly used electrical components in an air conditioning system. Topics include: pressure switches, transformers, other commonly used controls, diagnostic techniques, installation procedures, solid state controls, and safety.

Prereqs: None

Coreqs: AIRC 1010 and (AIRC 1030 or IDFC 1011)

Provides instruction on the installation and service of residential air conditioning systems. Topics include: installation procedures, split-systems, add-on systems, packaged systems, system wiring, control circuits, and safety.
AIRC
1070
4

Prereqs: AIRC 1030 or IDFC 1011

Coreqs: None

This course introduces principles of combustion and service requirements for gas heating systems. Topics include servicing procedures, electrical controls, piping, gas valves, venting, code requirements, principles of combustion, and safety.

Prereqs: AIRC 1010 and (AIRC 1030 or IDFC 1011)

Coreqs: None

This course provides instruction on the principles, applications, and operation of a residential heat pump system. Topics include installation and servicing procedures, electrical components, geothermal ground source energy supplies, dual fuel, valves, and troubleshooting techniques.

Prereqs: AIRC 1010 and (AIRC 1030 or IDFC 1011)

Coreqs: None

This course provides instruction on the troubleshooting and repair of major components of a residential air conditioning system. Topics include troubleshooting techniques, electrical controls, air flow, the refrigeration cycle, electrical servicing procedures, and safety.
Occupational Electives (4 - 9 hours)

Prereqs: Provisional

Coreqs: None

Provides an increased level of concepts and theory beyond ACT 102. Students are introduced to more design theory in commercial refrigeration. Topics include: refrigeration heat calculation, equipment selection, refrigeration piping, codes, and safety.

Prereqs: None

Coreqs: AIRC 1090

Introduces the application of fundamental theories and concepts of refrigeration. Emphasis will be placed on equipment application and installation procedures. Topics include: equipment application, installation procedures, cycle controls, energy management, and safety.

Prereqs: Provisional Admission

Coreqs: None

Continues to provide experience in maintenance techniques in servicing light commercial refrigeration systems. Topics include: system clearing, troubleshooting procedures, replacement of components, and safety.

Prereqs: None

Coreqs: Provisional Admission

Introduces the fundamental concepts, terminology, and operations necessary to use computers. Emphasis is placed on basic functions and familiarity with computer use. Topics include an introduction to computer terminology, the Windows environment, Internet and email, word processing software, spreadsheet software, database software, and presentation software.

Prereqs: None

Coreqs: None

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

Prereqs: Provisional Admission

Coreqs: None

Introduces electrical symbols and their use in construction blueprints, electrical schematics, and diagrams. Topics include: electrical symbols, component identification, print reading and scales and measurement.
ELTR
1110
4

Prereqs: None

Coreqs: None

Introduces the fundamental theories and applications of single-phase motors. Topics include: motor theory/operating principles, motor terminology, motor identification, NEMA standards, motor efficiencies, preventive maintenance, troubleshooting/failure analysis, and NEC requirements.
3

Prereqs: None

Coreqs: None

Introduces residential wiring practices and procedures. Topics include: residential circuits, print reading, National Electrical Code, wiring materials, determining the required number and location of lighting/receptacles and small appliance circuits, wiring methods (size and type conductors, box fill calculations and voltage drop), switch control of luminaries, receptacle installation including bonding, GFCI and AFCI circuits, special purposes outlets - ranges, cook tops, ovens, dryers, water heaters, sump pumps, and sizing OCPDs (circuit breakers and fuses).

Prereqs: Provisional Admission

Coreqs: None

Provides an in-depth study of the health and safety practices required for maintenance of industrial, commercial, and home electrically operated equipment. Topics include: introduction to OSHA regulations; safety tools, equipment, and procedures; and first aid and cardiopulmonary resuscitation.
IDFC
1011
3

Prereqs: None

Coreqs: None

Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.
3

Prereqs: None

Coreqs: None

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.
3

Prereqs: None

Coreqs: None

This course introduces alternating current theory and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, and inductance and capacitance.
3

Prereqs: None

Coreqs: None

This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, inductance and capacitance.

 

Students working on air conditioner

Related Program Options:

Air Conditioning Technology Degree
Advanced Commercial Refrigeration Specialist TCC
Air Conditioning Repair Specialist TCC

Gainful Employment Disclosure

Advisors

Scott Watson
Air Conditioning Program Coordinator
Office: 144
Phone: (229) 468-2212
Email:
Campus: Coffee Campus

Joe Davis
Air Conditioning Program Coordinator
Office: Berrien Hall, Room 203
Phone: (229) 245-6452
Email:
Campus: Valdosta Campus