Automotive Technology - AT14

Offered at the Following Campuses

  • Ben Hill-Irwin Campus
  • Valdosta Campus

Program Overview

The Automotive Technology Diploma program is a sequence of courses designed to prepare students for careers in the automotive service and repair profession. Learning opportunities enable students to develop academic, technical and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of automotive mechanics theory and practical application necessary for successful employment by offering advanced level courses in engine repair, automatic transmissions/transaxles, and manual drive trains and axles, whereas the Automotive Fundamentals diploma program offers training in these skills areas at the entry level technician only.  Program graduates receive an Auto Technology diploma that qualifies them as well rounded entry-level technicians.

Entrance Requirements

*Submit a completed application and application fee;    
 
*Be at least 16 years of age;    
 
*Submit official high school transcript or GED transcript;   
  
*Submit official college transcripts, if applicable;     
 
*Present acceptable SAT or ACT scores taken within the last 60 months, or acceptable COMPASS or ASSET scores taken within the last 60 months. Documentation on a college transcript of successful completion of appropriate courses from a regionally accredited college or university may be accepted in lieu of test scores.

Course Overview

Credit Hours
General Education Core (8 hours)

Prereqs: Diploma Level Math Scores OR MATH 0090 w/ a "C" or better

Coreqs: None

Emphasizes the application of basic mathematical skills used in the solution of occupational and technical problems. Topics include fractions, decimals, percents, ratios and proportions, measurement and conversion, formula manipulation, technical applications, and basic statistics.

Prereqs: Diploma Level Reading and Writing Scores OR READ 0097 and/or ENGL 0097 w/ a "C" or better

Coreqs: None

Emphasizes the development and improvement of written and oral communication abilities. Topics include analysis of writing, applied grammar and writing skills, editing and proofreading skills, research skills, and oral communication skills.

Prereqs: Provisional Admission

Coreqs: None

Emphasizes human relations and professional development in today's rapidly changing world that prepares students for living and working in a complex society. Topics include human relations skills, job acquisition skills and communication, job retention skills, job advancement skills, and professional image skills.
Occupational Courses (47 hours)

Prereqs: None

Coreqs: Provisional Admission

Introduces the fundamental concepts, terminology, and operations necessary to use computers. Emphasis is placed on basic functions and familiarity with computer use. Topics include an introduction to computer terminology, the Windows environment, Internet and email, word processing software, spreadsheet software, database software, and presentation software.

Prereqs: Provisional Admission

Coreqs: None

Introduces basic concepts and practices necessary for safe and effective automotive shop operations. Topics include: safety procedures; legal/ethical responsibilities; general service; hand tools; shop organization, management, and work flow systems.

Prereqs: None

Coreqs: AUTT 1010

Introduces brake systems theory and its application to automotive systems and anti-lock brake system (ABS) to include ABS components and ABS operation, testing, and diagnosis. Topics include: hydraulic system diagnosis and repair; drum brake diagnosis and repair; disc brake diagnosis and repair; power assist units diagnosis and repair; miscellaneous brake components (wheel bearings, parking brakes, electrical, etc.) diagnosis and repair; test, diagnose, and service electronic brake control system.

Prereqs: None

Coreqs: AUTT 1010

Introduces students to principles of steering, suspension, wheel alignment, electronic steering, and electronic active suspension. Topics include: general suspension and steering systems diagnosis; steering systems diagnosis and repair; suspension systems diagnosis and repair; related suspension and steering service; wheel alignment diagnosis, adjustment and repair, wheel and tire diagnosis and repair.

Prereqs: AUTT 1020

Coreqs: None

Introduces the theory and operation of automotive heating and air conditioning systems. Students attain proficiency in inspection, testing, service, and repair of heating and air conditioning systems and related components. Topics include: a/c system diagnosis and repair; refrigeration system component diagnosis and repair; heating, ventilation, and engine cooling systems diagnosis and repair; operating systems and related controls diagnosis and repair; refrigerant recovery, recycling, and handling.

Prereqs: None

Coreqs: AUTT 1010

This course introduces basics of rear-wheel drive, front-wheel drive, and four-wheel drive line related operation, diagnosis, service and related electronic controls. Topics include: drive shaft and half shaft, universal and constant-velocity (CV) joint diagnosis and repair; ring and pinion gears and differential case assembly; limited slip differential; drive axle shaft; four-wheel drive/all-wheel drive component diagnosis and repair. Introduces basics of front and rear-wheel drive, clutch operation, diagnosis and service is included. Electronic controls related to transmission/transaxles operation are discussed. Topics include: clutch diagnosis and repair; transmission/transaxles diagnosis and repair.

Prereqs: AUTT 1020

Coreqs: None

Introduces students to basic automatic transmission/transaxle theory, operation, inspection, service, and repair procedures as well as electronic diagnosis and repair. Topics include: general automatic transmission and transaxle diagnosis; in vehicle and off vehicle transmission and transaxle maintenance, adjustment and repair.
Auto Electrical Course Options - Choose 7 Credit Hours Below (7 hours)

Prereqs: None

Coreqs: AUTT 1010

Introduces automotive electricity, emphasizes the basic principles, diagnosis, and service/repair of batteries, starting systems, starting system components, alternators and regulators, lighting system, gauges, horn, wiper/washer, and accessories.
Or Both of the Following: (7 hours)

Prereqs: None

Coreqs: AUTT 1010

Introduces automotive electricity, emphasizes the basic principles, diagnosis, and service/repair of batteries, starting systems, starting system components, and basic lighting systems.

Prereqs: None

Coreqs: AUTT 1021

Emphasizes the basic principles, diagnosis, and service/repair of alternators and regulators, advanced lighting systems, gauges, horn, wiper/washer, and accessories.
Auto Engine Performance Course Options - Choose 7 Credit Hours Below (7 hours)

Prereqs: AUTT 1020

Coreqs: None

Introduces basic engine performance systems which support and control four stroke gasoline engine operations and reduce emissions. Topics include: general engine diagnosis, computerized engine controls and diagnosis, ignition system diagnosis and repair, fuel and air induction, exhaust systems, emission control systems diagnosis and repair, and other related engine service.
Or Both of the Following: (7 hours)

Prereqs: AUTT 1020

Coreqs: None

Introduces basic engine performance systems which support and control four stroke gasoline engine operations and reduce emissions.  Topics include: general engine diagnosis, fuel and air induction, exhaust systems, PCV control system diagnosis and repair, and other related engine service.

Prereqs: AUTT 1020, AUTT 1022

Coreqs: None

Continues basic engine performance systems which support and control four stroke gasoline engine operations and reduce emissions. Topics include: computerized engine controls and diagnosis, ignition system diagnosis and repair, and advanced emission control systems diagnosis and repair.
Auto Engine Repair Course Options - Choose 6 Credit Hours Below (6 hours)

Prereqs: None

Coreqs: AUTT 1010

This course introduces the student to automotive engine theory and repair, placing emphasis on inspection, testing, and diagnostic techniques for both 2 cycle and 4 cycle internal combustion engines. Topics include general engine diagnosis; removal and reinstallation; cylinder heads and valve trains diagnosis and repair; engine blocks assembly diagnosis and repair; lubrication and cooling systems diagnosis and repair.
Or Both of the Following: (6 hours)

Prereqs: None

Coreqs: AUTT 1010

This course introduces the student to automotive engine theory and repair, placing emphasis on inspection, testing, and diagnostic techniques for both 2 cycle and 4 cycle internal combustion engines. Topics include general engine diagnosis; removal and reinstallation; basic cylinder heads and valve trains diagnosis and repair; and lubrication and cooling systems diagnosis and repair.

Prereqs: None

Coreqs: AUTT 2011

This course continues automotive engine theory and repair, placing emphasis on inspection, testing, and diagnostic techniques for both 2 cycle and 4 cycle internal combustion engines. Topics include advanced cylinder heads and valve trains diagnosis and repair; and engine blocks assembly, diagnosis and repair.

 

student

Program Related Options:

Automotive Chassis Technician Specialist TCC
Automotive Transmission/Transaxle Technician Specialist

Gainful Employment Disclosure

Advisors

Jesse Davis
Automotive Technology Program Coordinator
Office: Room 309
Phone: (229) 468-2050
Email:
Campus: Ben Hill-Irwin Campus

Steve Bilger
Automotive Technology Program Coordinator
Office: Berrien Hall, Room 127
Phone: (229) 333-2115 ext.3042
Email:
Campus: Valdosta Campus