Industrial Systems Technology - IS13

Offered at the Following Campuses

  • Valdosta Campus
  • Coffee Campus
  • Ben Hill-Irwin Campus

Program Overview

The Industrial Systems Technology Degree program is designed for the student who wishes to prepare for a career as an Industrial Systems technician/electrician. The program provides learning opportunities that introduce,  develop and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill. The Degree program teaches skills in Industrial Systems Technology providing background skills in several areas of industrial maintenance including electronics, industrial wiring, motors, controls, plcs, instrumentation, fluid power, mechanical, pumps and piping, and computers. Graduates of the program receive an Industrial Systems technology Degree that qualifies them for employment as industrial electricians or industrial systems technicians.

Entrance Requirements

*Submit a completed application and application fee;
 
*Be at least 16 years of age;    
 
*Submit official high school transcript or GED transcript;   
  
*Submit official college transcripts, if applicable;     
 
*Present acceptable SAT or ACT scores taken within the last 60 months, or acceptable COMPASS or ASSET scores taken within the last 60 months. Documentation on a college transcript of successful completion of appropriate courses from a regionally accredited college or university may be accepted in lieu of test scores.

 

Course Overview

Credit Hours
General Core Courses (15 hours)
Area I - Language Arts/Communication (3 hours)

Prereqs: (ENGL 0098 or Test Score) AND (READ 0098 or Test Score)

Coreqs: None

Explores the analysis of literature and articles about issues in the humanities and in society. Students practice various modes of writing, ranging from exposition to argumentation and persuasion. The course includes a review of standard grammatical and stylistic usage in proofreading and editing. An introduction to library resources lays the foundation for research. Topics include writing analysis and practice, revision, and research. Students write a research paper using library resources and using a formatting and documentation style appropriate to the purpose and audience.
Area II - Social/Behavioral Sciences (3 hours)
XXX
xxx
Social Sciences/Behavioral Sciences Elective
3
Area III - Natural Sciences/Mathematics - Choose One of the Following (3 hours)

Prereqs: Placement Test Score or MATH 0090 AND Program Admission

Coreqs: None

Emphasizes algebra, statistics, and mathematics of finance. Topics include fundamental operations of algebra, sets and logic, probability and statistics, geometry, mathematics of voting and districting, and mathematics of finance.
3

Prereqs: Degree Level Math Scores

Coreqs: None

Emphasizes functions using real-world applications as models. Topics include fundamental concepts of algebra; functions and graphs; linear, quadratic, polynomial, exponential, and logarithmic functions and models; systems of equations; and optional topics in algebra.
MATH
1111
3

Prereqs: Degree Level Math Scores

Coreqs: None

Emphasizes techniques of problem solving using algebraic concepts. Topics include fundamental concepts of algebra, equations and inequalities, functions and graphs, and systems of equations; optional topics include sequences, series, and probability or analytic geometry.
Area IV - Humanities/Fine Arts (3 hours)
XXX
xxx
Humanities/Fine Arts Elective
3
Additional General Education Core Requirement (3 hours)
XXX
xxx
General Education Core Elective
3
Occupational Courses (41 - 45 hours)
IDSY
1130
5

Prereqs: None

Coreqs: None

Teaches the fundamental concepts of industrial wiring with an emphasis on installation procedures. Topics include: grounding, raceways, three-phase systems, transformers (three-phase and single-phase), wire sizing, overcurrent protection, NEC requirements, industrial lighting systems, and switches, receptacles, and cord connectors.
5

Prereqs: None

Coreqs: None

This course introduces and emphasizes the basic skill necessary for mechanical maintenance personnel. Instruction is also provided in the basic physics concepts applicable to the mechanics of industrial production equipment, and the application of mechanical principles with additional emphasis on power transmission and specific mechanical components.

Prereqs: None

Coreqs: None

This course provides instruction in the fundamentals of safely operating hydraulic, pneumatic, and pump and piping systems. Theory and practical application concepts are discussed. Topics include hydraulic system principles and components, pneumatic system principles and components, and the installation, maintenance, and troubleshooting of pump and piping systems.
Circuit Analysis - Choose One of the Below Options (3 - 5 hours)

Prereqs: None

Coreqs: MATH 1012 or MATH 1013

This course introduces direct current concepts and applications, alternating current theory and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, series, parallel, and simple combination circuits, inductance and capacitance, diodes and amplifiers, and semiconductor fundamentals.
Direct Current I - Choose One of the Following (3 hours)
IDFC
1011
3

Prereqs: None

Coreqs: None

Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.
3

Prereqs: None

Coreqs: None

This course introduces alternating current theory and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, and inductance and capacitance.
Electrical Systems Basics I - Choose One of the Following (3 hours)

Prereqs: None

Coreqs: None

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.
3

Prereqs: None

Coreqs: None

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.
3

Prereqs: None

Coreqs: None

This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, inductance and capacitance.

Electric Motors I - Choose One of the Following (4 - 5 hours)
ELTR
1110
4

Prereqs: None

Coreqs: None

Introduces the fundamental theories and applications of single-phase motors. Topics include: motor theory/operating principles, motor terminology, motor identification, NEMA standards, motor efficiencies, preventive maintenance, troubleshooting/failure analysis, and NEC requirements.

Prereqs: None

Coreqs: None

This course introduces the fundamental concepts, principles, and devices involved in industrial motor controls, theories and applications of single and three-phase motors, wiring motor control circuits, and magnetic starters and braking. Topics include, but are not limited to, motor theory and operating principles, control devices, symbols and schematic diagrams, NEMA standards, Article 430 NEC and preventative maintenance and troubleshooting.
Industrial PLC's - Choose One of the Following (4 - 5 hours)
ELTR
1220
4

Prereqs: None

Coreqs: None

Introduces operational theory, systems terminology, PLC installations, and programming procedures for programmable logic controls. Emphasis is placed on pic programming, connections, installations, and start-up procedures. Topics include: PLC hardware and software, PLC functions and terminology, introductory numbering systems, PLC installation and set up, PLC programming basics, relay logic instructions, timers and counters, connecting field devices to I/O cards, and PLC safety procedures.

Prereqs: None

Coreqs: None

This course introduces the operational theory, systems terminology, PLC installation, and programming procedures for Programmable Logic Controllers. Emphasis is placed on PLC programming, connections, installation, and start-up procedures. Other topics include timers and counters, relay logic instructions, and hardware and software applications.
XXX
xxx
Occupational Elective
15

 

Industrial

Related Program Options:

Industrial System Technology Diploma
Electrical Maintenance Technician TCC

Advisors

Thomas Moody
Industrial Systems Technology Program Coordinator
Office: Ben Hill Hall, Room 408
Phone: (229) 468-2000 ext. 2056
Email:
Campus: Ben Hill-Irwin Campus

Drew Vickers
Department Chair for Technical Education/Industrial and Electrical Systems Program Coordinator
Office: 428
Phone: (229) 259-5193 ext. 3032
Email:
Campus: Valdosta Campus