Course Catalog

Welding & Joining Technology - WAJ2 Diploma


Campus Locations: Valdosta, Ben Hill Irwin, Coffee

The Welding and Joining Technology diploma is designed to prepare students for careers in the welding industry. Program learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes welding theory and practical application necessary for successful employment. Program graduates receive a Welding and Joining Technology diploma, have the qualifications of a welding and joining technician, and are prepared to take qualification tests.

Requirements:

  • Submit a completed application and application fee
  • Be at least 16 years of age
  • Submit official high school transcript or High School Equivalency transcript or college transcripts showing successful completion of 60+ semester credits or 72+ quarter credits
  • Submit official college transcripts, if applicable
  • Present acceptable ACCUPLACER, ACT, ASSET, COMPASS, PSAT, or SAT scores or GED score of 145 or higher or have one of the following: an associate degree or higher or have a HOPE GPA of 2.6 after the completion of 10th grade. Documentation on a college transcript of successful completion of appropriate courses from a regionally accredited college or university may be accepted in lieu of test scores.
Gainful Employment Information
Curriculum Outline (54 hours)
General Core Courses 8
ENGL 1010

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 0 Pre-requisite(s): Diploma Level Reading and Writing Scores OR READ 0090 and/or ENGL 0090 w/ a “C” or better Co-requisite(s): None Emphasizes the development and improvement of written and oral communication abilities. Topics include analysis of writing, applied grammar and writing skills, editing and proofreading skills, research skills, and oral communication skills.

3
MATH 1012

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 0 Pre-requisite(s): Diploma Level Math Scores or MATH 0090 w/ a “C” or better Co-requisite(s): None Emphasizes the application of basic mathematical skills used in the solution of occupational and technical problems. Topics include fractions, decimals, percents, ratios and proportions, measurement and conversion, geometric concepts, technical applications, and basic statistics.

3
EMPL 1000

Weekly Contact Hours: Lecture - 2 Lab 2 - 0 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None Emphasizes human relations and professional development in today's rapidly changing world that prepares students for living and working in a complex society. Topics include human relations skills, job acquisition skills and communication, job retention skills, job advancement skills, and professional image skills.

2
Occupational Courses 46
WELD 1000

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): Program Admission Co-requisite(s): None This course provides an introduction to welding technology with an emphasis on basic welding laboratory principles and operating procedures. Topics include: industrial safety and health practices, hand tool and power machine use, measurement, Oxyacetylene welding, and Welding career potentials.

4
WELD 1010

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): Program Admission Co-requisite(s): WELD 1000 Introduces fundamental principles, safety practices, equipment, and techniques necessary for metal heating, oxyfuel cutting, and plasma cutting. Topics include: metal heating and cutting techniques, manual and automatic oxyfuel cutting techniques, oxyfuel pipe cutting, plasma torch and theory, plasma machine set up and operation, and plasma cutting techniques.

4
WELD 1030

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): Program Admission Co-requisite(s): WELD 1000 This course introduces the knowledge and skills necessary for reading welding and related blueprints and sketches. An emphasis is placed on identifying types of welds, and the associated abbreviations and symbols.

4
WELD 1040

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): Program Admission Co-requisite(s): WELD 1000 This course introduces the major theory, safety practices, and techniques required for shielded metal arc welding (SMAW) in flat positions. Qualification tests, flat position, are used in the evaluation of student progress toward making industrial welds.

4
WELD 1070

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Introduces the major theory, safety practices, and techniques required for shielded metal arc welding (SMAW) in the overhead position. Qualification tests, overhead position, are used in the evaluation of student progress toward making industrial standard welds. Topics include: overhead SMAW safety and health practices, selection and applications of electrodes for overhead SMAW, overhead SMAW joints, and overhead SMAW to specification.

4
WELD 1050

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Introduces the major theory, safety practices, and techniques required for shielded metal arc welding (SMAW) in the horizontal position. Qualification tests, horizontal position, are used in the evaluation of student progress toward making industrial standard welds. Topics include: horizontal SMAW safety and health practices, selection and applications of electrodes, selection and applications for horizontal SMAW, horizontal SMAW joints, and horizontal SMAW to specification.

4
WELD 1060

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Introduces the major theory, safety practices, and techniques required for shielded metal arc welding (SMAW) in the vertical position. Qualification tests, vertical position, are used in the evaluation of student progress toward making industrial standard welds. Topics include: vertical SMAW safety and health practices, selection and applications of electrodes for vertical SMAW, vertical SMAW joints, and vertical SMAW to specification.

4
WELD 1090

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): None Co-requisite(s): WELD 1000 Provides knowledge of theory, safety practices, equipment and techniques required for successful gas metal arc welding. Qualification tests, all positions, are used in the evaluation of student progress toward making industrial standard welds. Topics include: GMAW safety and health practices; GMAW theory, machines, and set up; transfer modes; wire selection; shielded gas selection; and GMAW joints in all positions.

4
WELD 1110

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Provides knowledge of theory, safety practices, inert gas, equipment, and techniques required for successful gas tungsten arc welding. Qualification tests, all positions, are used in the evaluating of student progress toward making industrial standard welds. Topics include: GTAW safety and health practices; shielding gases; metal cleaning procedures; GTAW machines and set up; selection of filler rods; GTAW weld positions; and production of GTAW beads, bead patterns, and joints.

4
WELD 1120

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Introduces industrial qualification methods, procedures, and requirements. Students are prepared to meet the qualification criteria of selected national welding codes and standards. Topics include: test methods and procedures, national industrial codes and standards, fillet and groove weld specimens, and preparation for qualifications and job entry.

4
Choose Two of the Following (6 Hours) 6
COLL 1010

Weekly Contact Hours: Lecture - 2 Lab 2 - 0.5 Lab 3 - 2.5 Pre-Requisites: None Co-Requisite: None This course is designed to assist the learner to acquire skills necessary to achieve academic, personal, and professional success and to improve student retention. Areas of importance include Getting off to a Good Start, Learning and Personality Styles, Time and Personal Financial Management, Stress Management and Wellness, Studying and Test Taking Skills, Communication Skills, Career Planning and Goal Setting, Computer Applications/Technology Skills and Employability/Professional Skills.

3
COMP 2000

Weekly Contact Hours: Lecture-3 Lab 2 - 0 Lab 3 - 0 Pre-Requisites: Program Admission Co-Requisite: None This course provides an introduction to computer applications for the development of analytical and problem-solving workplace skills. The course introduces the fundamental concepts, terminology, and operations necessary to use computers. Topics include file management, word processing software, database software, spreadsheet software, and presentation software skill development. The course also introduces terminology related to computer hardware, computer networks, and social and ethical concepts.

3
WELD 1150

Weekly Contact Hours: Lecture - 2 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Provides knowledge of theory, safety practices, inert gas, equipment, and techniques required for successful advanced gas tungsten arc welding (GTAW). Qualification tests, all positions, are used in the evaluation of student progress toward making advanced level industrial standard welds. Topics include: GTAW safety and health practices; shielding gases; metal cleaning procedures; GTAW machines and equipment set up; selection of filler rods; GTAW weld positions; and advanced production of GTAW beads, bead patterns, and joints.

3
WELD 1151

Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): WELD 1030 Co-requisite(s): None Presents practices common in the welding and metal fabrication industry. Topics include: metal fabrication safety and health practices and metal fabrication procedures.

3
WELD 1152

Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Provides the opportunity to apply skills to pipe welding operations. Topics include: pipe welding safety and health practices, pipe welding nomenclature, pipe layout and preparation, pipe joint assembly, horizontal welds on pipe (2G), vertical welds on pipe (5G), and welds on 45 degree angle pipe (6G).

4
WELD 1153

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Provides knowledge of theory, safety practices, equipment, and techniques required for successful flux cored arc welding (FCAW). Qualification tests, all positions, are used in the evaluation of student progress toward making industrial standards welds. Topics include: FCAW safety and health practices, FCAW theory, machine set up and operation, shielded gas selection, and FCAW joints in all positions.

4
WELD 1156

Weekly Contact Hours: Lecture - 3 Lab 2 - 0 Lab 3 - 3 Pre-requisite(s): WELD 1000 Co-requisite(s): None Provides an introduction to ornamental ironworks with emphasis on safety practices, equipment and ornamental ironwork techniques. Topics include: introduction to ornamental ironworks and safety practices; use of scroll machine, and use of bar twister.

4
Faculty
Advisor

Area Director--Technical & Industrial

Advisor

Welding Instructor

Up one level
Programs of Study